Product Description

Dharmi Engineers manufacturing & exporting of vide range of direct mounting pad Ball Valves as per ISO ***1. Another method of mounting actuators of vales is the direct mount configuration. I this design the manufacturer’s valve can accept an actuator bolted directly to the mounting pad of the valve. No. external brackets are required. The bottom of the actuator is flush with the mounting pad of valve. No external brackets are required. The bottom of the actuator is flush with the mounting pad of the valve. This design alleviates a number of problems mentioned above. There are no external moving parts. The coupling (if used) is less subject to corrosion. An external bracket does not exist to create surfaces that may be untrue. Size Range of Ball Valve from �” to 8” & Pressure Rating up to Class **0, available in Flanged End, Screwed End, Socket Weld End, Butt Weld End Connection with Hand Lever, Gear, Pneumatic Actuator Operation. Design Standard of Ball Valve as per API 6D/BS ***1, Testing Standard – BS ***5 Part I, Fire Safe Test Standard – API **7 / BS ***5 Part II. There are additional advantages to direct mount valve/actuator packages: ADVANTAGES OF DIRECT MOUNT OF ACTUATORS Strength of mount between valve/actuator: No brackets that can bend after installation. Safety: No pinch points Compactness: Smaller/Shorter package takes up less space in pipe galley. Low profile Actuator/Valve Stem alignment: Shorter distance between valve/actuator allows closer tolerance. Modular: Simplicity: No confusion as to how bracket bolts to equipments or how to install adapter. Lighter Weight: Package no longer includes bracket and large adapter. Lower Cost: Fewer parts in complete actuator/valve package. Fewer pipe hangers required. Direct valve stem/actuator connection: Less chance for hysterisis. One less connection with no adapter involved. O-Ring stem seals: Lower torque and smaller actuators are required. Maintenance: Often no packing to adjust. Less corrosion in stem